English
Acktar Advanced Coatings
Acktar Advanced Coatings
Search:
Home > Products & Services > Optical Components > Laser Beam Dumps
Products & Services

Laser Beam Dumps

This is must have in every lab device increases safety and reduces risk of laser damage by trapping the beam entered into the aperture. The unique design makes this beam dump Lightweight and at the same time strong and stable.
 
Our beam dumps fits for most beam sizes and can be simply used in a lab or in other optical system. Suitable for CW and pulsed beams up to 10W/cm2. Wide wavelength range: from EUV through VIS and up to LWIR.
 
The built-in mounting suits for standard optical stand (M6 x 1.0) and can be easy held.
 
Acktar unique anti-reflective coatings implemented in the device gives reflectivity factor less than 10-6.
 
 
Acktar coatings have been tested under a variety of test conditions and the results presented show that Acktar Black Coatings exhibit very impressive LIDT values under a broad variety of conditions and constitute an excellent choice where a combination of high absorptance and high tolerance of laser energy is required. For detailed LIDT data click here.
 
 
Laser Beam Dump                      Laser Beam Dump
 
 

Specifications (tube dump):

Max Beam Diameter [mm]

33 / 45 / 55

Reflectivity Factor

<10-6

Max Beam Power Density

10W/cm2

Wavelengths range

200nm - 10um

Mounting Thread

M6 x 1.0

Size (dia. x length)

38mm x 80mm
50mm x 90mm
63 mm * 110mm

 
 

Specifications (flat dump):

Max Beam Diameter [mm]

80mm

Max Beam Power Density

20W/cm2

Wavelengths range

200nm - 2um

Mounting Thread

M6 x 1.0

Size

90 mm * 90mm * 15mm

 
 
For more information contact our sales representative: customer-support@acktar.com
 
 

Home   |   About Us   |   Products & Services   |   Microarray & Microplate   |   Media   |   Online Store   |   Contact Us
© ACKTAR Ltd.19 Topaz St., P.O.B. 8643; Kiryat-Gat , 8213513Israel
Phone: +972-8-6814213Fax: +972-8-6810198E-mail: customer-support@acktar.com